dmesg - Intel Xeon X5450
Linux version 4.10.0-40-generic (buildd@lgw01-amd64-036) (gcc version 6.3.0 20170406 (Ubuntu 6.3.0-12ubuntu2) ) #44-Ubuntu SMP Thu Nov 9 14:49:09 UTC 2017 (Ubuntu 4.10.0-40.44-generic 4.10.17)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Legacy x87 FPU detected.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000efffffff] usable
BIOS-e820: [mem 0x00000000fc000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000010fbfffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Xen HVM domU, BIOS 4.7.2-2.2 05/11/2017
Hypervisor detected: Xen
Xen version 4.7.
Xen Platform PCI: I/O protocol version 1
Netfront and the Xen platform PCI driver have been compiled for this kernel: unplug emulated NICs.
Blkfront and the Xen platform PCI driver have been compiled for this kernel: unplug emulated disks.
You might have to change the root device
from /dev/hd[a-d] to /dev/xvd[a-d]
in your root= kernel command line option
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x10fc00 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-combining
C0000-FFFFF write-back
MTRR variable ranges enabled:
0 base 00F0000000 mask 3FF0000000 uncachable
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0xf0000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fb630-0x000fb63f] mapped at [ffffa04f000fb630]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffffa04f00098000] 98000 size 24576
BRK [0x8782c000, 0x8782cfff] PGTABLE
BRK [0x8782d000, 0x8782dfff] PGTABLE
BRK [0x8782e000, 0x8782efff] PGTABLE
BRK [0x8782f000, 0x8782ffff] PGTABLE
BRK [0x87830000, 0x87830fff] PGTABLE
BRK [0x87831000, 0x87831fff] PGTABLE
RAMDISK: [mem 0x32e69000-0x3572bfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000EA020 000024 (v02 Xen )
ACPI: XSDT 0x00000000FC00CF40 000044 (v01 Xen HVM 00000000 HVML 00000000)
ACPI: FACP 0x00000000FC00CC80 0000F4 (v04 Xen HVM 00000000 HVML 00000000)
ACPI: DSDT 0x00000000FC0042A0 008956 (v02 Xen HVM 00000000 INTL 20150619)
ACPI: FACS 0x00000000FC004260 000040
ACPI: FACS 0x00000000FC004260 000040
ACPI: APIC 0x00000000FC00CD80 0000D8 (v02 Xen HVM 00000000 HVML 00000000)
ACPI: HPET 0x00000000FC00CED0 000038 (v01 Xen HVM 00000000 HVML 00000000)
ACPI: WAET 0x00000000FC00CF10 000028 (v01 Xen HVM 00000000 HVML 00000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000010fbfffff]
NODE_DATA(0) allocated [mem 0x10fbd3000-0x10fbfdfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000010fbfffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009dfff]
node 0: [mem 0x0000000000100000-0x00000000efffffff]
node 0: [mem 0x0000000100000000-0x000000010fbfffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000010fbfffff]
On node 0 totalpages: 1047453
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 15296 pages used for memmap
DMA32 zone: 978944 pages, LIFO batch:31
Normal zone: 1008 pages used for memmap
Normal zone: 64512 pages, LIFO batch:15
ACPI: PM-Timer IO Port: 0xb008
ACPI: Local APIC address 0xfee00000
IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ5 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ10 used by override.
ACPI: IRQ11 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 15 CPUs, 7 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xffffffff]
e820: [mem 0xf0000000-0xfbffffff] available for PCI devices
Booting paravirtualized kernel on Xen HVM
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:15 nr_cpu_ids:15 nr_node_ids:1
percpu: Embedded 36 pages/cpu @ffffa0500ae00000 s107992 r8192 d31272 u262144
pcpu-alloc: s107992 r8192 d31272 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 --
xen: PV spinlocks enabled
PV qspinlock hash table entries: 256 (order: 0, 4096 bytes)
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031064
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3993392K/4189812K available (9093K kernel code, 1667K rwdata, 3820K rodata, 2236K init, 2364K bss, 196420K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=15, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=15.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=15
NR_IRQS:524544 nr_irqs:952 16
xen:events: Using FIFO-based ABI
xen:events: Xen HVM callback vector for event delivery is enabled
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 30580167144 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2992.651 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5985.21 BogoMIPS (lpj=11970432)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160930
ACPI: 1 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 2 MCE banks
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 36K
ftrace: allocating 34202 entries in 134 pages
smpboot: Max logical packages: 2
x2apic: IRQ remapping doesn't support X2APIC mode
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
Xen: using vcpuop timer interface
installing Xen timer for CPU 0
smpboot: CPU0: Intel(R) Xeon(R) CPU X5450 @ 3.00GHz (family: 0x6, model: 0x17, stepping: 0x6)
cpu 0 spinlock event irq 53
Performance Events: unsupported p6 CPU model 23 no PMU driver, software events only.
NMI watchdog: disabled (cpu0): hardware events not enabled
NMI watchdog: Shutting down hard lockup detector on all cpus
smp: Bringing up secondary CPUs ...
installing Xen timer for CPU 1
x86: Booting SMP configuration:
.... node #0, CPUs: #1
cpu 1 spinlock event irq 59
installing Xen timer for CPU 2
#2
cpu 2 spinlock event irq 65
installing Xen timer for CPU 3
#3
cpu 3 spinlock event irq 71
installing Xen timer for CPU 4
#4
cpu 4 spinlock event irq 77
installing Xen timer for CPU 5
#5
cpu 5 spinlock event irq 83
installing Xen timer for CPU 6
#6
cpu 6 spinlock event irq 89
installing Xen timer for CPU 7
#7
cpu 7 spinlock event irq 95
smp: Brought up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (47881.72 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 4096 (order: 6, 262144 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 22:41:57, date: 11/28/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: Using configuration type 1 for base access
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
xen: --> pirq=16 -> irq=9 (gsi=9)
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
acpiphp: Slot [0] registered
acpiphp: Slot [3] registered
acpiphp: Slot [4] registered
acpiphp: Slot [5] registered
acpiphp: Slot [6] registered
acpiphp: Slot [7] registered
acpiphp: Slot [8] registered
acpiphp: Slot [9] registered
acpiphp: Slot [10] registered
acpiphp: Slot [11] registered
acpiphp: Slot [12] registered
acpiphp: Slot [13] registered
acpiphp: Slot [14] registered
acpiphp: Slot [15] registered
acpiphp: Slot [16] registered
acpiphp: Slot [17] registered
acpiphp: Slot [18] registered
acpiphp: Slot [19] registered
acpiphp: Slot [20] registered
acpiphp: Slot [21] registered
acpiphp: Slot [22] registered
acpiphp: Slot [23] registered
acpiphp: Slot [24] registered
acpiphp: Slot [25] registered
acpiphp: Slot [26] registered
acpiphp: Slot [27] registered
acpiphp: Slot [28] registered
acpiphp: Slot [29] registered
acpiphp: Slot [30] registered
acpiphp: Slot [31] registered
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfbffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
pci 0000:00:01.1: reg 0x20: [io 0xc220-0xc22f]
pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:01.2: [8086:7020] type 00 class 0x0c0300
pci 0000:00:01.2: reg 0x20: [io 0xc200-0xc21f]
pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
* Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
* this clock source is slow. Consider trying other clock sources
pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI
pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf1ffffff pref]
pci 0000:00:02.0: reg 0x14: [mem 0xf3000000-0xf3000fff]
pci 0000:00:03.0: [5853:0001] type 00 class 0x010000
pci 0000:00:03.0: reg 0x10: [io 0xc000-0xc0ff]
pci 0000:00:03.0: reg 0x14: [mem 0xf2000000-0xf2ffffff pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs *5 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs *5 10 11)
random: fast init done
ACPI: Enabled 2 GPEs in block 00 to 0F
xen:balloon: Initialising balloon driver
xen_balloon: Initialising balloon driver
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
e820: reserve RAM buffer [mem 0x10fc00000-0x10fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 62.500000 MHz counter
clocksource: Switched to clocksource xen
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io 0x08a0-0x08a3] has been reserved
system 00:01: [io 0x0cc0-0x0ccf] has been reserved
system 00:01: [io 0x04d0-0x04d1] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
xen: --> pirq=17 -> irq=8 (gsi=8)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
xen: --> pirq=18 -> irq=12 (gsi=12)
pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
xen: --> pirq=19 -> irq=1 (gsi=1)
pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
xen: --> pirq=20 -> irq=6 (gsi=6)
pnp 00:05: [dma 2]
pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active)
xen: --> pirq=21 -> irq=4 (gsi=4)
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
xen: --> pirq=22 -> irq=7 (gsi=7)
pnp 00:07: Plug and Play ACPI device, IDs PNP0400 (active)
system 00:08: [io 0x10c0-0x1141] has been reserved
system 00:08: [io 0xb044-0xb047] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xf0000000-0xfbffffff window]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: PIIX3: Enabling Passive Release
pci 0000:00:01.0: Activating ISA DMA hang workarounds
xen: --> pirq=23 -> irq=23 (gsi=23)
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 0 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 41740K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xec000000-0xf0000000] (64MB) mapped at [ffffa04fec000000-ffffa04fefffffff]
Scanning for low memory corruption every 60 seconds
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1511908918.749:1): initialized
Initialise system trusted keyrings
workingset: timestamp_bits=36 max_order=20 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.26)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
efifb: probing for efifb
efifb: framebuffer at 0xf0000000, using 1408k, total 1408k
efifb: mode is 800x600x24, linelength=2400, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=0:8:8:8, shift=0:16:8:0
Console: switching to colour frame buffer device 100x37
fb0: EFI VGA frame buffer device
intel_idle: does not run on family 6 model 23
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
ACPI: Sleep Button [SLPF]
GHES: HEST is not enabled!
xen: --> pirq=87 -> irq=30 (gsi=30)
xen:grant_table: Grant tables using version 1 layout
Grant table initialized
00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
vbd vbd-5632: 19 xenbus_dev_probe on device/vbd/5632
ata_piix 0000:00:01.1: version 2.13
scsi host0: ata_piix
scsi host1: ata_piix
ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc220 irq 14
ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc228 irq 15
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
blkfront: xvda: barrier: enabled; persistent grants: disabled; indirect descriptors: disabled;
xvda: xvda1
PPP generic driver version 2.4.2
xen_netfront: Initialising Xen virtual ethernet driver
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:01.2: UHCI Host Controller
uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:01.2: detected 2 ports
uhci_hcd 0000:00:01.2: irq 23, io base 0x0000c200
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 4.10.0-40-generic uhci_hcd
usb usb1: SerialNumber: 0000:00:01.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one day, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: e3750b38850ad4014bf490b26198bd09707ff87e'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass! (rc=-19)
evm: HMAC attrs: 0x1
xenbus_probe_frontend: Device with no driver: device/vbd/5632
Magic number: 9:603:705
rtc_cmos 00:02: setting system clock to 2017-11-28 22:41:59 UTC (1511908919)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
ata2.01: NODEV after polling detection
ata2.00: ATAPI: QEMU DVD-ROM, 0.10.2, max UDMA/100
ata2.00: configured for MWDMA2
scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 0.10 PQ: 0 ANSI: 5
sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x xa/form2 tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg0 type 5
Freeing unused kernel memory: 2236K
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1132K
Freeing unused kernel memory: 276K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
usb 1-2: new full-speed USB device number 2 using uhci_hcd
FUJITSU Extended Socket Network Device Driver - version 1.2 - Copyright (c) 2015 FUJITSU LIMITED
usb 1-2: New USB device found, idVendor=0627, idProduct=0001
usb 1-2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb 1-2: Product: QEMU USB Tablet
usb 1-2: Manufacturer: QEMU 0.10.2
usb 1-2: SerialNumber: 1
[drm] Initialized
FDC 0 is a S82078B
checking generic (f0000000 160000) vs hw (f0000000 2000000)
fb: switching to cirrusdrmfb from EFI VGA
Console: switching to colour dummy device 80x25
xen: --> pirq=86 -> irq=24 (gsi=24)
[TTM] Zone kernel: Available graphics memory: 2021652 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] fb mappable at 0xF0000000
[drm] vram aper at 0xF0000000
[drm] size 33554432
[drm] fb depth is 24
[drm] pitch is 3072
fbcon: cirrusdrmfb (fb0) is primary device
Console: switching to colour frame buffer device 128x48
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: QEMU 0.10.2 QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-2/1-2:1.0/0003:0627:0001.0001/input/input5
hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Pointer [QEMU 0.10.2 QEMU USB Tablet] on usb-0000:00:01.2-2/input0
cirrus 0000:00:02.0: fb0: cirrusdrmfb frame buffer device
[drm] Initialized cirrus 1.0.0 20110418 for 0000:00:02.0 on minor 0
tsc: Refined TSC clocksource calibration: 2992.609 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b22ffac20b, max_idle_ns: 440795340611 ns
raid6: sse2x1 gen() 3455 MB/s
raid6: sse2x1 xor() 4874 MB/s
raid6: sse2x2 gen() 6968 MB/s
raid6: sse2x2 xor() 5905 MB/s
raid6: sse2x4 gen() 7702 MB/s
raid6: sse2x4 xor() 5636 MB/s
raid6: using algorithm sse2x4 gen() 7702 MB/s
raid6: .... xor() 5636 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
xor: measuring software checksum speed
prefetch64-sse: 11927.000 MB/sec
generic_sse: 10576.000 MB/sec
xor: using function: prefetch64-sse (11927.000 MB/sec)
async_tx: api initialized (async)
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
Btrfs loaded, crc32c=crc32c-generic
EXT4-fs (xvda1): mounted filesystem with ordered data mode. Opts: (null)
random: crng init done
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected virtualization xen.
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Created slice User and Session Slice.
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
iscsi: registered transport (iser)
EXT4-fs (xvda1): re-mounted. Opts: errors=remount-ro
systemd-journald[424]: Received request to flush runtime journal from PID 1
Adding 969960k swap on /swapfile. Priority:-1 extents:4 across:994536k SSFS
piix4_smbus 0000:00:01.3: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr
parport_pc 00:07: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
ppdev: user-space parallel port driver
audit: type=1400 audit(1511908928.592:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lxc-start" pid=763 comm="apparmor_parser"
audit: type=1400 audit(1511908928.604:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=764 comm="apparmor_parser"
audit: type=1400 audit(1511908928.604:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=764 comm="apparmor_parser"
audit: type=1400 audit(1511908928.660:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default" pid=761 comm="apparmor_parser"
audit: type=1400 audit(1511908928.660:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-cgns" pid=761 comm="apparmor_parser"
audit: type=1400 audit(1511908928.660:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-mounting" pid=761 comm="apparmor_parser"
audit: type=1400 audit(1511908928.660:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-nesting" pid=761 comm="apparmor_parser"
audit: type=1400 audit(1511908928.700:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=766 comm="apparmor_parser"
audit: type=1400 audit(1511908928.732:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=762 comm="apparmor_parser"
audit: type=1400 audit(1511908928.732:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=762 comm="apparmor_parser"
cgroup: new mount options do not match the existing superblock, will be ignored
systemd[1]: Started ACPI event daemon.